
Core edge trimming
Modular circular blade
Review the micro-serrated aluminum option for accessible core edges. Confirm edge form, diameter, reach and the complete ultrasonic holder system before choosing the blade.
Core cutting & CNC machining tools
Thin metal walls change the cut. Explore tooling for core trimming, stock removal and contour machining, with support and chip control built into the selection.

Aluminum honeycomb gives sandwich structures a lightweight core. During machining, each thin foil wall can deflect before it separates; the process must also manage metallic burrs, adhesion and chips.
Specify alloy, foil gauge, cell dimensions, density and orientation. Plan support for the actual cut rather than treating the blank like a solid aluminum block.
Identify both skins and the adhesive. Aluminum, CFRP and GFRP skins introduce different cutting demands; a core tool alone may not suit the full panel.
Mark edge fill, potted areas and inserts on the drawing. These solid regions can change load and chip formation along the same toolpath.
Start with the feature and workpiece state. Bare-core cutting, bulk removal and bonded-panel machining need different tool and setup decisions.
Start with the required core edge and the support available beside it.
Family to review: Modular circular blade. Confirm the aluminum cutting-edge configuration for your core.
Discuss this operationPlan core pocketing around thin walls, cutting engagement and debris removal.
Family to review: Two-stage slitting / hogger tool. Confirm the aluminum cutting-edge configuration for your core.
Discuss this operationReview curved blanks and taper transitions before committing to a production path.
Family to review: Three-stage modular hogger. Confirm the aluminum cutting-edge configuration for your core.
Discuss this operationCompTex lists aluminum cutting-edge options in these honeycomb tool families. Review the configuration against your alloy, foil, cell structure and machine before ordering.

Modular circular blade
Review the micro-serrated aluminum option for accessible core edges. Confirm edge form, diameter, reach and the complete ultrasonic holder system before choosing the blade.

Two-stage slitting / hogger tool
A combined slitting and core-removal family. The catalogue identifies a circular saw blade for aluminum honeycomb; match the blade, hogger, engagement and chip route to your part.

Three-stage modular hogger
A modular blade, hogger and holder family with an aluminum saw-blade option. Review contour access, section thickness and finishing allowance; confirm the assembled cutting configuration.
A correct external dimension can hide folded cells, burrs or retained chips. Inspect the wall condition against the drawing and the next assembly process.
Connect the machining task to the part construction. These application concepts illustrate possible uses; the actual panel specification determines the approved core and skin materials.
For panels specified with aluminum honeycomb, review core profiling before bonding and edge or opening work after bonding. Identify skins, adhesive and local inserts.
Aerospace applicationsLightweight floor and interior-panel designs may specify aluminum honeycomb. Match contouring, edge trimming and mounting openings to the complete sandwich construction.
Rail applicationsCovers, partitions and equipment panels can need cutouts and edge features. Mark filled edges and insert zones, then review access and burr requirements around each feature.
Discuss your panelApplication illustrations are conceptual and do not represent CompTex customer or supply cases.
Practical answers about aluminum honeycomb cutting, burr control and tool selection.
Start with the alloy, foil gauge, cell size and workpiece state. Match an aluminum-specific cutting edge to the feature and support the core near the path without distorting it. Confirm the tool and engagement on a supported trial, checking foil walls and dimensions against the drawing; no setup guarantees undamaged cells for every core.
Thin metal walls may bend and roll at the exit rather than separate cleanly. Edge condition, tooth form, support, direction, engagement and material adhesion can contribute. Inspect the burr location, cutting edge and setup together; a photograph alone does not establish the root cause.
Do not assume interchangeability. CompTex catalogue families distinguish smooth blades for aramid / glass honeycomb from saw or micro-serrated options for aluminum. Confirm the actual blade, holder, core specification and permitted operation before use.
It is an option to review with the aluminum-specific cutting configuration and a compatible complete system. Material grade, foil gauge, core geometry, access and support still matter. Ultrasonic assistance does not remove cutting loads, burr risks or the need for an inspected trial.
A tool selected for exposed core is not automatically suitable for a bonded panel. Identify both skins, adhesive, core, inserts and potted regions. The tool may encounter metal skins, composite fibers and solid fill within one feature, so the complete stack can require a different tool or separate operations.
Use the exact tool, aluminum core specification, engagement, support and machine system to establish trial conditions. A solid-aluminum setting or paper-core setting is not a general starting point for thin foil honeycomb. Confirm any fluid and cleaning method against surface treatment, adhesive and later bonding requirements.
Send the alloy / core grade, foil gauge, density, cell size, thickness and ribbon direction, using clear units. Identify bare core or bonded panel, all skins and local fill, drawing or 3D model, operation, machine / ultrasonic system and the acceptance requirement. Include current tool details and close-up cut-edge photographs where available.
Send your core specification, part drawing and cut-edge requirement. Include foil gauge, cell size and the machine details so we can review the aluminum tooling configuration.
xiufeng@hsitool.comStart with your part and operation.