Leave Your Message

Ball Electroplated Diamond Grinding Burr for 3D Composite Profiling

3D composite profile grinding and surface blending

Ball Electroplated Diamond Grinding Burr for 3D Composite Profiling

Follow curved surfaces.
Blend local transitions.

A spherical head with electroplated diamond grit for local grinding of curved surfaces, radii and profile junctions. For CFRP and fiberglass composites, match ball diameter, contact position and toolpath to the local curvature and available access.

Explore Applications
Complete CompTex ball electroplated diamond grinding burr with a spherical abrasive head and cylindrical shank
Actual product: spherical abrasive head and cylindrical shank
Ball diameter DIA
6–20mm
Shank Y
6mm
Overall length L
60mm

Match the sphere
to the surface.

Local contact changes with workpiece curvature and tool orientation. Assess the ball diameter together with the target surface and the space around it.

Spherical working surface + electroplated diamond grit

Abrasive particles remove material through local contact. Plan successive passes around the allowance; assess this process separately from cutting-edge ball-end milling.

Ball diameter and access

A larger ball can be assessed for open surfaces. Concave transitions need a check of head entry and clearance around the neck and shank. Ball diameter alone does not define the finished fillet radius.

Contact position and toolpath

Adjust contact position and overlap between adjacent passes. Local peripheral speed falls near the rotation axis, so assess tool orientation and avoid prolonged dwell or concentrated loading at one point.

Surface quality depends on the grinding conditions.

Diameter, grit, path overlap, engagement and tool condition all affect the result. Specify the target surface and stock allowance, then confirm the process on the actual material.

Curved components.
Blended profile transitions.

Assess this ball diamond burr for local refinement of an existing shape. Match diameter and approach to curvature, clearance, retained surfaces and workpiece support.

Curved composite workpiece with a contoured inner surface, visible fiber texture and an edge flange
Start with the workpiece curvature.Check local contours, edge thickness and shank clearance together with the material to be removed.
CFRP
Confirm grinding conditions for the resin, layup and edge requirements.
Fiberglass / GFRP
Consider cure state, glass content and the required surface.
Other materials
Assess ceramics, tungsten carbide and hard coatings by exact material.

Formed composite shells and covers

Curved faces and local surface blending

Refine small profile irregularities and transitions on an existing surface. Plan adjacent passes around the spherical contact area, with suitable support for thin walls.

Selection inputs: local curvature, wall thickness, retained profile and fixturing.

Radiused grooves and open pockets

Concave junctions and rounded transitions

Assess local grinding where the entry and shank clearance allow access. Match the head to the target contour and approach; do not infer the minimum internal radius from ball diameter alone.

Selection inputs: entry width, concave curvature, neck clearance and engagement.

Molded composite parts and repair areas

Parting-line remnants and local high spots

Assess small amounts of residual material for controlled removal toward the target profile. Use the reference contour and allowance limit to protect surfaces that must be retained.

Selection inputs: defect location, maximum removal, surface requirements and next operation.

Applications are selection references. The image shows a curved composite workpiece, not a result produced by this burr. Confirm final contour, edges and surface quality through trials on the actual workpiece.

Choose the diameter.
Check the working space.

Five standard sizes share a 60 mm overall length and 6 mm shank. Match the ball to the local curvature and access, then confirm grit, clamping and grinding conditions.

Complete ball burr dimension drawing showing head diameter, overall length L and shank diameter Y
Dimension drawing: check DIA, L and Y separately
DIA
Ball head diameter
L
Overall tool length
Y
Shank diameter

Check the contact area and neck/shank clearance for each application. L is overall length, not permitted grinding depth.

Swipe to view all specifications. Linear dimensions are in mm.

Standard ball electroplated diamond grinding burrs · Dimensions in mm
Order code Ball DIA Overall L Shank Y Select size
30509341001 8 60 6
30509341002 6 60 6
30509341003 10 60 6
30509341004 16 60 6
30509341005 20 60 6

Sizes retain the original table order. Standard data does not specify grit, maximum speed, neck dimensions or permitted overhang. Confirm these for the workpiece and setup; other dimensions can be discussed.

Grit and allowance

Fine surfaces, profile correction and larger stock removal require different abrasive configurations and engagement.

Dust and heat

Plan suitable extraction or compatible cooling. Loading, resin smearing or heat calls for a check of tool condition and contact.

Clamping and speed

Use clamping suited to the 6 mm shank. Confirm speed against the tool limit, equipment and selected overhang.

Selection questions

How does a ball diamond burr differ from a ball-end mill?

This burr grinds with electroplated diamond particles. A ball-end mill removes material with cutting edges. Select each process for the material, allowance, contour and surface requirement; speeds, feeds and stepovers cannot be transferred directly.

Does a larger ball always produce a better surface?

Diameter alone is insufficient. A larger head still needs suitable contour clearance and entry space. Grit, contact position, path overlap, support and tool condition affect the surface. Confirm access and geometry first, then determine conditions through trials.

Does L60 mm mean a 60 mm grinding depth?

L is overall tool length. Reach also depends on head size, neck/shank clearance, clamping overhang and machine orientation. It does not establish permitted grinding depth or overhang.

Should I use dry or wet grinding?

Check the resin system, downstream operations, dust handling and equipment. Dry grinding needs effective dust removal. If using a coolant, confirm compatibility with the workpiece, machine and any subsequent bonding or coating.

Discuss the surface,
diameter and grinding conditions.

Share the area to refine, target contour and stock allowance so contact and access can be assessed together.

xiufeng@hsitool.com

Select a standard size above or describe a custom requirement.

Creates a downloadable draft on your device. Nothing is sent automatically.

    product description

    Product overview

    A spherical head with electroplated diamond grit for local grinding of curved surfaces, radii and profile junctions. For CFRP and fiberglass composites, match ball diameter, contact position and toolpath to the local curvature and available access.

    Selection considerations

    This burr grinds with electroplated diamond particles. A ball-end mill removes material with cutting edges. Select each process for the material, allowance, contour and surface requirement; speeds, feeds and stepovers cannot be transferred directly.

    Application checks

    Diameter alone is insufficient. A larger head still needs suitable contour clearance and entry space. Grit, contact position, path overlap, support and tool condition affect the surface. Confirm access and geometry first, then determine conditions through trials.

    Discuss your application

    For product selection, send CompTex your contour radius, ball diameter and finish requirements. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    METRIC
    Order Number DIA L Y
    30509341001 8 60 6
    30509341002 6 60 6
    30509341003 10 60 6
    30509341004 16 60 6
    30509341005 20 60 6
    Other sizes available upon request. Contact CompTex.

    Leave Your Message