Leave Your Message

Ball Nose Carbide Honeycomb Core Hogger Roughing End Mill

Honeycomb core contour roughing / ZrN coating

Ball Nose Carbide Honeycomb Core Hogger Roughing End Mill

Remove stock from local recesses
and curved core transitions.

A multi-tooth ball-nose cutter in 6–25 mm diameters for roughing curved core blanks, concave regions and thickness transitions. Compared with large-diameter reduced-shank models, this tool offers equal cutting and shank diameters with length options for different local access needs.

Discuss product selection
CompTex solid carbide ball-nose honeycomb core hogger with the straight shank on the left and ZrN-coated multi-tooth cutting section on the right
Whole-tool view / Equal cutting and shank diameters
Detail cropped from the official product image, showing the ball-nose profile and multiple cutting teeth

Ball nose with multiple cutting teethSolid carbide body with a ZrN-coated cutting section.

Cutting diameter d1
6–25mm
Configurations
12
Flutes Z
6 / 8 / 10

Seven cutting diameters, with cutting and overall lengths according to size.

Ball-nose profile for local contours

Remove core stock progressively across curves, concave regions and rounded transitions. Select around local curvature and the narrowest access area, rather than overall part size alone.

Center-cutting edges for entry and pocketing

The center-cutting design supports axial entry followed by cavity roughing. Confirm the actual entry method, layers and engagement against core support, machine conditions and the end-edge design.

ZrN coating for the cutting section

ZrN provides surface protection. Assess friction, core-chip adhesion and edge wear during selection and trials. Chip clearance also depends on flute space, cutting conditions and extraction.

Shape the local contour
of a honeycomb core blank.

Prioritize contour-roughing assessments for non-metallic honeycomb cores such as aramid paper. Confirm core density, cell size and resin condition alongside target curvature and local support.

A curved honeycomb core block with local thickness variation, illustrating a contoured core form
Consider the core shape and its support togetherExternal curvature, local thickness and cell orientation affect machining regions and holding arrangements.
Core details
Material grade, density, cells, resin impregnation and cure condition
Geometry
Local curvature, recess width, machining depth and finishing allowance

Curved sandwich parts / Core preparation

Core blanks for fairings, blades and curved covers

Rough local contours and transition regions before skin lay-up, bringing the blank closer to its target thickness distribution. Check access against the 3D model and retain even allowance for the final contour.

Selection focus: local curvature, ball contact position and finishing stock.

Local clearance / Recess roughing

Shaped core blocks with clearance areas or local thinning

Remove material in recessed and concave areas by coordinating entry, layers and contouring. Choose a diameter that can enter the region, then select cutting and overall lengths around engagement height and fixture position.

Selection focus: opening width, remaining floor thickness and overhang.

Lightweight sandwich structures / Thickness transitions

Rounded core transitions for insulation parts and sandwich shells

Organize machining regions around thickness changes and rounded connections. Use roughing to approach the contour, followed by finishing to control the required surface and dimensions.

Selection focus: thin-wall support, edge integrity and final surface requirements.

Applications are selection references. The photograph illustrates a curved core form, not a machining result from this model or a conclusion about a specific material grade. Aluminum honeycomb, metal-skinned sandwich panels and structural foams require separate assessment.

Choose diameter for access.
Choose length for reach.

Local curvature, effective cutting contact and installed overhang affect the cutting conditions even with a ball nose. Use sufficient dimensions and stable holding to plan the roughing operation.

  1. 01

    Select diameter around local geometry

    Check the recess opening, local radii and fixture boundaries for cutter access. A smaller diameter may reach more localized regions; assess rigidity and chip clearance at the same time.

  2. 02

    Separate cutting length, overall length and overhang

    Use cutting length to check the engaged cutting region and overall length to check the installation space. Choose an extended configuration when the setup requires it.

  3. 03

    Plan entry and subsequent finishing

    Center-cutting capability links entry and pocket roughing. Confirm ball contact position, layers and support in trials, then leave suitable stock for finishing.

How should core support be planned during entry?

Check remaining thickness, backing support and cell orientation before choosing axial, ramped or side entry. Universal speeds, feeds and single-pass depths are not supplied; establish trial conditions for the actual material and machine.

Select a diameter.
Then compare its length options.

Seven diameters and 12 configurations, with equal cutting and shank diameters. A given diameter may have different cutting or overall lengths, so check each complete row.

Ball-nose honeycomb core hogger drawing identifying cutting diameter d1, cutting length l2, overall length l1 and shank diameter d2
d1 Cutting diameter / l2 Cutting length / l1 Overall length / d2 Shank diameter / Z Flutes

One diameter can have different lengthsFor example, the 6 mm diameter has three cutting / overall length combinations: 32 / 64, 32 / 76 and 70 / 152 mm.

Cutting and overall lengths are geometric dimensions, not permissible machining-depth or single-pass depth ratings.

Diameter and length options

Order number
8056031001
Cutting / shank diameter
6 / 6 mm
Flutes / ZrN code
6 flutes / 2235

Check cutting length, overall length, effective holding length and installed overhang together.

Scroll horizontally for all dimensions and selection buttons.

All standard sizes · Dimensions in mm
Order number d1 l2 l1 d2 Z ZrN code Selection
8056031001 6 32 64 6 6 2235
8056031002 6 32 76 6 6 2236
8056031003 6 70 152 6 6 2237
8056031004 10 51 102 10 8 2238
8056031005 13 51 102 13 10 2239
8056031006 13 76 152 13 10 2240
8056031007 16 51 110 16 10 2241
8056031008 19 51 102 19 10 2242
8056031009 19 76 152 19 10 2243
8056031010 20 80 125 20 10 2244
8056031011 25 51 102 25 10 2245
8056031012 25 76 152 25 10 2246

2235–2246 are retained as source ZrN-column codes. Confirm the exact profile, end edges and operating conditions against the approved drawing and trials. Other sizes can be discussed for the actual part.

Selection questions

How does it differ from the TiCN reduced-shank ball-nose model?

This ZrN-coated solid carbide tool has 6–25 mm cutting diameters, equal shank diameters and multiple length options. The TiCN reduced-shank model has a larger cutting head relative to its shank. Choose around the machining region, local geometry and holding conditions.

Why are several configurations offered for one diameter?

Cutting and overall lengths suit different engagement regions and installation spaces. For 6 mm diameter, two configurations share a 32 mm cutting length with 64 or 76 mm overall lengths; the extended option has a 70 mm cutting length and 152 mm overall length.

Can it enter directly and rough a cavity?

The product specification identifies a center-cutting design for linking entry and cavity roughing. Confirm entry direction, layers and parameters against the end edges, core support and machine. This is not a general-purpose drilling specification.

Is finishing needed after ball-nose roughing?

Roughing removes stock and approaches the target shape. Plan finishing and inspection for bonding faces, final contours and strict dimensions according to allowance, core condition and acceptance criteria.

Share the local contour and depth.
Find the right diameter and length.

Confirm the core, access area and holding arrangement first, then discuss entry, toolpaths and trial inspection points.

xiufeng@hsitool.com

Select a catalog size or describe the required diameter, cutting length and overall length.

Creates a draft on your device only. Download the text and contact us by email; nothing is sent automatically.

    product description

    Product overview

    A multi-tooth ball-nose cutter in 6–25 mm diameters for roughing curved core blanks, concave regions and thickness transitions. Compared with large-diameter reduced-shank models, this tool offers equal cutting and shank diameters with length options for different local access needs.

    Selection considerations

    Check remaining thickness, backing support and cell orientation before choosing axial, ramped or side entry. Universal speeds, feeds and single-pass depths are not supplied; establish trial conditions for the actual material and machine.

    Application checks

    This ZrN-coated solid carbide tool has 6–25 mm cutting diameters, equal shank diameters and multiple length options. The TiCN reduced-shank model has a larger cutting head relative to its shank. Choose around the machining region, local geometry and holding conditions.

    Discuss your application

    For product selection, send CompTex your core grade, contour radius and finishing allowance. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    METRIC
    Order Number d1 l2 l1 d2 Z ZrN
    8056031001 6 32 64 6 6 2235
    8056031002 6 32 76 6 6 2236
    8056031003 6 70 152 6 6 2237
    8056031004 10 51 102 10 8 2238
    8056031005 13 51 102 13 10 2239
    8056031006 13 76 152 13 10 2240
    8056031007 16 51 110 16 10 2241
    8056031008 19 51 102 19 10 2242
    8056031009 19 76 152 19 10 2243
    8056031010 20 80 125 20 10 2244
    8056031011 25 51 102 25 10 2245
    8056031012 25 76 152 25 10 2246
    Other sizes available upon request. Contact CompTex.

    Leave Your Message