Leave Your Message

Micro PCD Drill Bit for Semiconductor and Composite Boring

Micro PCD Drill Bit for Semiconductor and Composite Boring

For micro-hole applications in the semiconductor industry. Match the drill to the substrate, hole-edge requirements and positional accuracy.

Micro PCD cutting tips with a carbide shank, two flutes and a 130° point. Standard diameters range from 0.10 to 0.45 mm.

Discuss your micro-hole application
CompTex semiconductor micro PCD drill with a fine PCD cutting end and carbide shank
Micro PCD cutting tips / Carbide shank
Diameter d
0.10–0.45mm
Point angle θ
130°
Flutes Z
2 flutes
Shank SD
3.175mm

Which parts can it drill?

Select around the hole function and material structure in semiconductor substrates, package carriers and electronic composites.

Semiconductor wafer and patterned structures, shown as an industry substrate reference
Semiconductor wafer: substrate referenceShown as industry context. Confirm hole locations, film layers and material condition from the part drawing.
Silicon-based materials / Semiconductor substrates

Wafer coupons and process test samples

Consider the drill for mechanical micro-holes in silicon-based test coupons. Identify bare or film-coated substrates, then specify diameter, thickness, edge distance and allowable hole-edge damage.

Check: surface films, microcrack inspection and entry/exit support

Technical ceramics / Packaging substrates

Ceramic substrates and small package carriers

For micro-holes in package substrates, carriers and trial parts, evaluate the material grade and sintered condition first. Review hole layout and local support against the part geometry.

Check: hardness and brittleness, edge chipping, hole spacing and inspection

Highly filled resins / Electronic composites

Packaging composites and small functional panels

Evaluate locating and assembly holes in composite parts. Filler composition, loading and any metal layers affect cutting load, debris clearance and tool selection.

Check: fillers and layers, hole residue and post-drilling cleaning

These are selection references. Verify the actual material and hole design through process assessment and first-piece trials. The pictured circuits are not machining results from this drill.

Micro-hole drilling:
define three conditions.

At diameters of 0.10–0.45 mm, small changes in runout, clamping position and debris clearance can affect hole consistency.

Material and layers
Specify substrate grade, thickness, surface films and metal layers. Assess hard-brittle substrates, sintered ceramics and filled resins separately.Information needed: material condition, layer thickness and hole-layout drawing
Hole quality and inspection
Define diameter and position requirements separately from edge chipping, microcracks and wall condition. PCD construction alone does not establish process accuracy.Information needed: dimensional tolerances, damage limits and measurement method
Machine and cleanliness
Check actual tool runout, extension and part support. Set debris-clearing cycles for the depth, and confirm compatibility with coolant, particle control and subsequent cleaning.Information needed: spindle and collet, debris clearance and cleanliness requirements

Standard sizes from 0.10 mm

Eight configurations share a 38 mm overall length and 3.175 mm shank. Both 0.40 and 0.45 mm diameters have two length configurations.

Original semiconductor PCD micro drill drawing with d, θ, L1, L2, L and SD h6
d
Drill diameter
θ
Point angle
L1/L2
Drawing length symbols
L
Overall length
SD
Shank, shown as h6
Z
Flute count, no unit
Units
Lengths in mm; angle in °

L1 and L2 follow the source drawing and are not usable drilling depths. Confirm actual reach against extension, support and debris-clearance conditions.

Swipe horizontally to view the complete table.

Lengths in mm; point angle in °
Order number d L1 L2 L SD Z θ Selection
7056044001 0.1 0.7 0.9 38 3.175 2 130°
7056044002 0.2 1 1.2 38 3.175 2 130°
7056044003 0.32 3.5 4 38 3.175 2 130°
7056044004 0.39 11 11.5 38 3.175 2 130°
7056044005 0.4 6.5 7 38 3.175 2 130°
7056044006 0.4 11 11.5 38 3.175 2 130°
7056044007 0.45 6.5 7 38 3.175 2 130°
7056044008 0.45 11 11.5 38 3.175 2 130°

For the same diameter, check the order number, L1 and L2 together. A longer drawing dimension does not imply a greater recommended feed depth per cycle.

Semiconductor micro drill FAQ

How does it differ from the 0.5–2 mm PCD drill?

This model covers 0.10–0.45 mm for micro-holes in semiconductor and electronic substrates. The 0.5–2 mm model covers larger holes, with a different size range and application focus.

Can a tolerance or chip-free result be guaranteed?

Results depend on material, spindle runout, clamping, depth and measurement method. Validate tolerance, edge chipping and microcrack limits through first-piece trials under the actual process conditions.

Is it suitable for every wafer or ceramic?

Assess the specific material and condition. Bare silicon, film-coated substrates and ceramics at different sintered states have different process and inspection requirements. Share the grade and layer information.

Does a longer configuration mean deep-hole capability?

L1 or L2 alone cannot establish usable depth. The available cutting section, extension, small-diameter stiffness, part support and debris-clearing strategy must be considered together.

What information is needed for an application review?

Provide the material, hole diameter and position, actual depth, film and metal layers, allowable chipping or cracking, and machine and cleanliness requirements.

Start with your micro-hole requirements

Confirm material and hole type first, then discuss drill dimensions and trial conditions.

xiufeng@hsitool.com

Select a standard size, or start with your semiconductor substrate and hole requirements.

Your draft is created locally and is not submitted. Download the TXT file, then contact us by email.

    product description

    Product overview

    Micro PCD cutting tips with a carbide shank, two flutes and a 130° point. Standard diameters range from 0.10 to 0.45 mm.

    Selection considerations

    This model covers 0.10–0.45 mm for micro-holes in semiconductor and electronic substrates. The 0.5–2 mm model covers larger holes, with a different size range and application focus.

    Application checks

    Results depend on material, spindle runout, clamping, depth and measurement method. Validate tolerance, edge chipping and microcrack limits through first-piece trials under the actual process conditions.

    Discuss your application

    For product selection, send CompTex your material grade, micro-hole diameter and runout. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    METRIC
    Order Number d Angel L1 L2 L SD Z PCD
    7056044001 0.1 130° 0.7 0.9 38 3.175 2 1230
    7056044002 0.2 130° 1 1.2 38 3.175 2 1231
    7056044003 0.32 130° 3.5 4 38 3.175 2 1232
    7056044004 0.39 130° 11 11.5 38 3.175 2 1233
    7056044005 0.4 130° 6.5 7 38 3.175 2 1234
    7056044006 0.4 130° 11 11.5 38 3.175 2 1235
    7056044007 0.45 130° 6.5 7 38 3.175 2 1236
    7056044008 0.45 130° 11 11.5 38 3.175 2 1237
    Other sizes available upon request. Contact CompTex.

    Leave Your Message