Eleven metric options are listed. d1, R, l2, l1 and d2 are in mm; Z is a flute count. The same diameter can have different radii and overall lengths.
Parts & Applications.
Examples for material and feature review. Each application requires drawing and trial confirmation.
Composite edge detail · CompTex catalog. Geometry reference; not a machining result for this model.
CFRP brackets
Recesses, mounting slots and local pockets in carbon-fiber brackets and equipment carriers.
Review the specified floor-to-wall fillet, layup and residual wall thickness.
GFRP housings
Recessed seats, access features and internal pockets in glass-fiber housings and protective covers.
Confirm the resin, corner clearance, entry route and support around the feature.
Composite jigs
Locating pockets, clearance channels and support nests in composite assembly tooling.
Check the full laminate or hybrid stack, contact geometry and acceptable edge damage.
Catalog material directions include CFRP / GFRP, aramid fiber, hybrid stacks, copper and aluminum with more than 12% silicon. Confirm every layer, grade and condition before selection.
Before you select.
Match the corner, usable cutting length and full tool envelope.
CFRP cut-out machining · CompTex catalog. Setup reference; not a trial of this router bit.
Match R to the part fillet
R is the cutting-corner radius, not a full ball-tip radius. Review the floor-to-wall transition separately from the slot-end radius in plan view, which is governed by cutter diameter and the toolpath.
Check l2 before overall reach
Listed cutting lengths are 3–9 mm; overall lengths are 50–105 mm. Total length does not establish usable cutting depth. Neck relief is described but not dimensioned, so confirm clearance, overhang and holder access on the final drawing.
Support both faces and trial
The source lists two straight flutes and 0° helix. This does not guarantee zero axial force or prevent all delamination. Confirm entry capability, backing support and dust removal, then inspect the floor, walls and both faces in a representative trial.
Selection questions.
Is a bullnose the same as a ball nose?
No. A bullnose has rounded cutting corners around a central end region; a ball nose has a spherical end. Every listed option here has R smaller than half of d1. Select the corner radius from the part drawing rather than using a ball-nose assumption.
Are the two 6 mm options interchangeable?
Order 5056032007 has R 0.3 mm and overall length l1 75 mm. Order 5056032008 has R 0.5 mm and l1 100 mm. Both list l2 6 mm, d2 6 mm and Z 2. Compare radius, reach and the final tool envelope before substituting either option.
Does PCD confirm the diamond construction?
The product is cataloged in the PCD family, while the source also describes a thick diamond film and a vapor-deposited shell. These descriptions do not establish a solid PCD body or a coating thickness. Confirm the diamond construction and substrate in the final tool specification.
What is needed for a process review?
Share the complete material stack, part drawing, required radius, slot or pocket depth, selected order number, machine, holder and finish limits. No model-specific speed, feed or plunge limits are published here; material compatibility and cutting conditions require review and trial confirmation.
Discuss your part.
Share the material and feature requirements so we can review the tool geometry with you.
The PCD bullnose router bit is intended for corner-radius routing of slots and pockets in composite parts. Match the tool radius to the floor-to-wall transition, then check cutting length, access and workpiece support against the drawing.
Selection considerations
A bullnose has rounded cutting corners around a central end region; a ball nose has a spherical end. Every listed option here has R smaller than half of d1. Select the corner radius from the part drawing rather than using a ball-nose assumption.
Application checks
Order 5056032007 has R 0.3 mm and overall length l1 75 mm. Order 5056032008 has R 0.5 mm and l1 100 mm. Both list l2 6 mm, d2 6 mm and Z 2. Compare radius, reach and the final tool envelope before substituting either option.
Discuss your application
For product selection, send CompTex your slot width, corner radius and material grade. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.
Product Parameters
METRIC
Order Number
d1
R
l2
l1
d2
Z
5056032001
2
0.2
3
50
4
2
5056032002
3
0.3
3
75
6
2
5056032003
3
0.5
3
75
6
2
5056032004
4
0.3
3
75
6
2
5056032005
4
0.5
3
75
6
2
5056032006
5
0.5
3
75
6
2
5056032007
6
0.3
6
75
6
2
5056032008
6
0.5
6
100
6
2
5056032009
8
0.5
7
100
8
2
5056032010
10
0.5
8
100
10
2
5056032011
12
1
9
105
12
2
Other sizes available upon request. Contact CompTex.