Leave Your Message

Solid PCD Square End Mill for Semiconductor Wafer Slotting

Solid PCD Square End Mill
for Semiconductor Wafer Slotting

Square-end milling for semiconductor slots, flat-bottom pockets and straight walls.

Review the substrate grade, feature depth and part support before selecting a tool for wafer or carrier-component machining.

Discuss your part
CompTex solid PCD square end mill with a fluted square-end cutting head
Square-end cutting profile · Original CompTex product image.
Listed diameter d
1–14 mm
End section L1
1.2 / 2.5 mm
Listed sizes
9

Dimensions & sizes.

Read the dimensions against your part drawing. Listed sizes are a starting point for tool selection.

Vector reference drawing showing d, D1, L1, L2, overall length L and shank SD for the square-end tool
d
Nominal diameter
D1
Neck diameter
L1
End-section length
L2
Reduced-section length
L
Overall length
SD
Shank diameter

9 listed sizes

Swipe the table to compare all dimensions →

Solid PCD square end mill listed specifications. All dimensions in millimeters.
Order number d D1 L1 L2 L SD Select size
6056039001 1 0.95 1.2 6 45 4
6056039002 2 1.95 1.2 6 45 4
6056039003 3 2.95 2.5 6 45 4
6056039004 4 3.95 2.5 6 45 4
6056039005 6 5.95 2.5 10 50 6
6056039006 8 7.95 2.5 10 50 8
6056039007 10 9.95 2.5 10 50 10
6056039008 12 - 2.5 - 50 12
6056039009 14 - 2.5 - 50 14
Metric · Dimensions in mmDiscuss another size

Dimensions match the product listing and catalog. A dash means not specified in the source. Confirm the final tool drawing and active cutting length.

Parts & Applications.

Examples for material and feature review. Each application requires drawing and trial confirmation.

Monocrystalline and polycrystalline silicon material reference from the CompTex catalog
Silicon material reference · CompTex catalog.
Not a model-specific trial or customer case.

Wafer & carrier slots

Straight grooves and shallow, flat-bottom reliefs in wafer or carrier/chuck components.

Review the substrate, thickness, backing support and allowable edge damage.

Packaging tooling

Blind slots, locating pockets and straight-sided recesses in packaging dies or fixtures.

Confirm material grade, entry path, floor flatness and internal corner allowance.

Electronic housings

Locating slots, shallow cavities and shoulders in suitable non-metallic or non-ferrous composite housings.

Check wall thickness, clamping access and edge-quality requirements on the drawing.

Catalog-listed material directions: composites, monocrystalline materials, AlSiC, silicon carbide, ceramics, glass and sapphire. Review the exact grade and condition before selection.

Before you select.

Review the geometry, entry strategy and substrate support together.

Micro machining process reference from the CompTex catalog
Brand catalog process reference; not a trial of this model.

Slot width & corner geometry

A square-end profile targets flat floors and straight sidewalls. The tool radius still limits internal corners; nominal diameter alone does not guarantee finished slot width.

Entry path & working reach

Confirm the active cutting length and clearance against the final drawing. L2 is not automatically the usable cutting depth. Verify center-cutting capability before plunging or machining a closed slot.

Support & edge inspection

Check spindle runout, holder condition, overhang and substrate support. Use a representative trial to inspect slot width, floor condition, edge chipping and tool wear.

Selection questions.

Which materials should I discuss?

The catalog lists composites, monocrystalline materials, AlSiC, silicon carbide, ceramics, glass and sapphire. These are source-listed application directions, not a verified machining window for every grade. Provide the exact substrate, condition and damage limits for review.

Can this tool plunge into a blind slot?

A square-end profile does not establish center-cutting or drilling capability. Confirm the end-face geometry and approved entry strategy. A pre-machined entry or another tool may be needed for a closed feature.

What does a dash in the table mean?

The original listing shows a dash for D1 and L2 on the 12 mm and 14 mm sizes. It is retained as an unspecified source value, not zero or a confirmed absence of a neck. Check the final drawing for those sizes.

Which speed and feed should I use?

No model-specific cutting-data window is supplied. Share the substrate, tool diameter, active cutting length, spindle, holder, support, entry method and quality criteria so conditions can be reviewed and tested.

Discuss your part.

Share the material and feature requirements so we can review the tool geometry with you.

xiufeng@hsitool.com

Choose a listed size above, or enter your requirements.

Creates a draft on your device. No files or details are uploaded.

    product description

    Product overview

    The solid PCD square end mill is listed for small slots, flat-bottom pockets and straight walls in semiconductor applications. Identify whether the workpiece is a wafer, substrate or carrier component, then confirm its material grade, feature depth and support conditions.

    Selection considerations

    The catalog lists composites, monocrystalline materials, AlSiC, silicon carbide, ceramics, glass and sapphire. These are source-listed application directions, not a verified machining window for every grade. Provide the exact substrate, condition and damage limits for review.

    Application checks

    A square-end profile does not establish center-cutting or drilling capability. Confirm the end-face geometry and approved entry strategy. A pre-machined entry or another tool may be needed for a closed feature.

    Discuss your application

    For product selection, send CompTex your material, slot width and required working reach. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    METRIC
    Order Number d D1 L1 L2 L SD
    6056039001 1 0.95 1.2 6 45 4
    6056039002 2 1.95 1.2 6 45 4
    6056039003 3 2.95 2.5 6 45 4
    6056039004 4 3.95 2.5 6 45 4
    6056039005 6 5.95 2.5 10 50 6
    6056039006 8 7.95 2.5 10 50 8
    6056039007 10 9.95 2.5 10 50 10
    6056039008 12 - 2.5 - 50 12
    6056039009 14 - 2.5 - 50 14
    Other sizes available upon request. Contact CompTex.

    Leave Your Message