Leave Your Message

TiCN Ball Nose Reduced Shank Honeycomb Core Roughing Router

Honeycomb core contouring / Rotary roughing tools

TiCN Ball Nose Reduced Shank Honeycomb Core Roughing Router

Large-diameter ball nose geometry
for stock removal on curved cores.

A multi-tooth ball nose cutter for 3D shaping and roughing of lightweight honeycomb cores. Select the cutting and shank diameters together, considering contour coverage, access and the allowance needed for finishing.

Discuss product selection
CompTex ball nose honeycomb roughing router with a reduced-diameter shank at left and a large multi-tooth ball nose at right
Ball nose profile / Multiple cutting teeth / Reduced shank
Cutting diameter d1
38–64mm
Flutes Z
16 / 18 / 20
Coating
TiCN

Three cutting diameters, with 13 mm or 19 mm shanks according to size.

Follow curved transitions

Assess roughing across changing heights, curved surfaces and local concave regions. Match the tool to local curvature and access, leaving appropriate stock for subsequent finishing.

Multiple teeth for stock removal

Closely spaced teeth engage the thin honeycomb walls during rotary cutting. The three diameters have 16, 18 and 20 flutes respectively. Evaluate feed, engagement and cell condition together.

Match cutter and holder dimensions

A larger cutting head uses a smaller-diameter holding shank. Check spindle load, speed limits, overhang and fixture clearance alongside the toolholder selection.

From honeycomb blanks
to 3D core contours.

Prioritize assessment of non-metallic honeycomb cores such as aramid paper honeycomb. Focus on core shaping and stock removal; confirm the grade, density, cell size and resin condition.

Honeycomb core samples with different cell sizes, illustrating thin cell walls and differences in core appearance
Understand the cells before planning the cutCell size, wall thickness and support affect loading of the thin walls and the resulting cut.
Core selection
Material type, density, cell size, resin impregnation or cure condition
Part conditions
Blank size, curvature, stock allowance, location and bottom support

Curved sandwich components / Core preparation

Core blanks for fairings, blades and curved sandwich parts

Rough the thickness distribution and external contour before skin lay-up or bonding. Assess a large-diameter ball nose for open curved regions, while checking access to small-radius concave corners.

Inspect: contour allowance, edge integrity and local cell crushing.

Local thinning / Concave regions

Core pockets, thickness transitions and local clearance areas

Remove stock in defined regions of the core blank. Plan the path around ball nose contact position, region width and fixture boundaries to limit concentrated pushing on weak sections.

Inspect: remaining bottom thickness, tool access and continuity of support.

Technical sandwich components / Core preparation

Shaped cores for insulation and lightweight sandwich parts

Machine transitions and external allowances toward the shape needed for assembly or final trimming. Divide roughing and finishing according to the final surface requirements.

Inspect: residual burrs, cell tearing and finishing allowance.

Applications are selection references. The photo illustrates core appearance, not a verified result from this model. Aluminum honeycomb, metal-skinned sandwich panels and dense laminates require separate tool and process assessment.

Remove the stock.
Then finish the final contour.

This tool focuses on roughing. Consider ball nose contact position, toolpath organization and thin-wall support together when setting the feed.

01

Divide regions by curvature

A larger ball nose can cover open contours; narrow concavities and small-radius transitions need separate assessment. Check interference using the actual tool profile and part model.

02

Remove stock in layers and control engagement

Plan entry, stepover and layers around cell orientation and support. Effective cutting diameter varies with the ball nose contact position, so nominal diameter alone does not define the local cutting conditions.

03

Leave an even allowance for finishing

Aim for a near-net rough shape with consistent remaining stock. Use subsequent finishing and inspection for final surface, bonding-face or close dimensional requirements.

Three cutting diameters.
Two shank diameters.

Check cutting diameter, cutting length, overall length, shank and flute count as a complete row. All three source sizes and TiCN-column codes are retained.

Ball nose reduced shank honeycomb router drawing identifying cutting diameter d1, cutting length l2, overall length l1 and shank diameter d2
d1 Cutting diameter / l2 Cutting length / l1 Overall length / d2 Shank diameter / Z Flutes

Compare by cutting diameter

Check contour coverage and access, then the holder and equipment.

Order number
8056034001
Cutting / overall length
25 / 89 mm
Shank / flutes
13 mm / 16 flutes
TiCN-column code
7426

The illustration identifies the design. Confirm each size on the approved drawing.

Scroll horizontally for all dimensions and selection buttons.

Standard sizes · Dimensions in mm
Order number d1 l2 l1 d2 Z TiCN code Selection
8056034001 38 25 89 13 16 7426
8056034002 51 38 102 19 18 7427
8056035003 64 50 114 19 20 7428

TiCN-column codes 7426 / 7427 / 7428 are retained from the source table. Cutting length is not a permissible single-pass depth rating. Other sizes can be discussed for the actual part.

Selection questions

How does this differ from an ultrasonic dagger blade?

This rotary ball nose roughing router removes honeycomb core stock and generates 3D contours. An ultrasonic dagger blade focuses on contour slicing and material separation. Select each around its operation.

Does a reduced shank fit every small spindle?

The reduced shank describes the size relationship between the cutting head and holding shank. Check permitted tool speed, equipment load, holder, balancing requirements, overhang and fixture clearance. Shank diameter alone does not establish suitability.

Can it plunge vertically or replace finishing?

A ball nose shape alone does not confirm center-cutting or plunge capability. This page addresses contour roughing; confirm entry methods against the specific cutting geometry. Plan suitable finishing when the final surface requirements call for it.

What information is needed for selection?

Supply core type, density, cell size, blank dimensions, a 3D part model, stock allowance and surface requirements. Include spindle, holder, overhang and support conditions to help select a size and define the trial.

Share the core and contour.
Find the right roughing size.

Confirm material, cutting diameter and clamping first, then discuss the path, support and trial inspection.

xiufeng@hsitool.com

Select a catalog size or describe the cutting and shank diameters you need.

Creates a draft on your device only. Download the text and contact us by email; nothing is sent automatically.

    product description

    Product overview

    A multi-tooth ball nose cutter for 3D shaping and roughing of lightweight honeycomb cores. Select the cutting and shank diameters together, considering contour coverage, access and the allowance needed for finishing.

    Selection considerations

    This rotary ball nose roughing router removes honeycomb core stock and generates 3D contours. An ultrasonic dagger blade focuses on contour slicing and material separation. Select each around its operation.

    Application checks

    The reduced shank describes the size relationship between the cutting head and holding shank. Check permitted tool speed, equipment load, holder, balancing requirements, overhang and fixture clearance. Shank diameter alone does not establish suitability.

    Discuss your application

    For product selection, send CompTex your core contours, ball diameter and tool overhang. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    METRIC
    Order Number d1 l2 l1 d2 Z TiCN
    8056034001 38 25 89 13 16 7426
    8056034002 51 38 102 19 18 7427
    8056035003 64 50 114 19 20 7428
    Other sizes available upon request. Contact CompTex.

    Leave Your Message