Leave Your Message

ZrN Carbide Core Hogger Honeycomb Roughing End Mill

Honeycomb face and pocket roughing

ZrN Carbide Core Hogger Honeycomb Roughing End Mill

Organize stock removal across
faces, pockets and stepped regions.

A flat-end profile with multiple roughing teeth for honeycomb face thinning, pocket roughing and sidewall stock removal. Match 6–25 mm diameters and length options to access, cutting contact and holding conditions.

Discuss product selection
CompTex ZrN-coated flat-end honeycomb core hogger with a straight shank on the left and multi-tooth cutting section on the right
Whole-tool view / Equal cutting and shank diameters
Detail cropped from the official tool image, showing multiple cutting teeth and the flat-end profile

Flat end for faces and pocketsSolid carbide with a ZrN-coated cutting section.

Cutting diameter d1
6–25mm
Configurations
12
Flutes Z
6 / 8 / 10

Seven diameters, with length options according to size.

Flat-end stock removal

Plan face thinning, pocket floors and stepped surfaces around the flat-end profile. Combine end and peripheral cutting to remove stock, then finish according to the surface requirements.

Multi-tooth core roughing

Multiple roughing teeth divide the removal of honeycomb cell walls. Coordinate feed, radial engagement and extraction capacity to limit chip recutting inside the pocket.

ZrN coating and wear control

ZrN provides a protective cutting-surface coating. Assess friction, debris adhesion and edge wear; actual service life depends on the core condition, support and cutting setup.

Which parts can it machine?
Flat core blanks, pockets and steps.

Prioritize aramid paper honeycomb roughing assessments. These applications concern core blanks and local regions; metal-skinned panels, aluminum honeycomb and structural foams require separate selection.

Flat aramid paper honeycomb blanks in different thicknesses, showing the planar form and open cells
Start with core thickness and the machining areaConfirm material, cell size and stock allowance before planning faces, pockets and edges.
Material details
Core grade, density, cells, resin impregnation and cure condition
Part details
Initial and target thickness, slot width, step height and support

Face thinning / Thickness preparation

Flat cores for sandwich partitions, access panels and interior panels

Remove thickness allowance from flat core blanks before skin lay-up, preparing the basic dimensions for subsequent shaping or bonding. Machine in layers according to support conditions and leave allowance for the final surface.

Selection focus: blank thickness, removal width, remaining thickness and base support.

Pocket roughing / Assembly clearance

Core blocks with cable channels, insert pockets or local recesses

Rough local pockets for wiring, inserts and assembly clearance by coordinating entry, lateral stock removal and floor allowance. Establish access first, then compare length options within the chosen diameter.

Selection focus: narrowest opening, pocket depth, remaining floor and chip exit path.

Step preparation / Sidewall allowance

Core blanks with stepped edges, joints or local thickness changes

Rough local steps, edges and joint clearance regions before contour finishing. Assess the flat end for planar and stepped areas; select a ball nose tool separately for continuous curved surfaces.

Selection focus: step height, sidewall contact length, edge support and subsequent trimming.

Applications are selection references. The photograph shows aramid honeycomb blank appearance, not a machining case for this model. Confirm material suitability and results for the actual part.

Faces, pockets and sidewalls
need different roughing priorities.

The flat-end profile helps organize machining regions. Results also depend on thin-wall support, cutting engagement and prompt chip clearance.

Faces and steps

Control thickness and allowance

Approach the target height in layers, coordinating path spacing and cutting engagement. Flat-end roughing does not replace final surface acceptance.

Check first

Base support, remaining thickness and subsequent bonding or finishing requirements.

Pockets and recesses

Establish entry, then clear laterally

The center-cutting configuration can connect entry and pocket roughing. Confirm axial, ramped or lateral entry against the end geometry and core support.

Check first

Opening width, entry space, remaining floor thickness and chip clearance.

Edges and sidewalls

Match cutting length to contact

Select cutting length for sidewall engagement and overall length for fixture access. Keep overhang appropriate and plan radial engagement.

Check first

Edge support, effective clamping, holder clearance and wall allowance.

Can a flat end machine internal corners?

A flat end suits planar and stepped regions, but pocket corners in the XY plane still retain a radius governed by cutter diameter. Confirm the end-edge corner geometry from the drawing. For smaller internal corners, check access and rigidity with a smaller diameter; a flat end does not create arbitrary sharp internal corners. Compare Ball Nose Honeycomb Core Hogger.

Choose diameter for access,
then length for contact and holding.

Seven diameters and 12 configurations. Cutting and shank diameters are equal. Check cutting length, overall length and flute count together; overall length is not a machining-depth rating.

Flat-end honeycomb core hogger drawing identifying cutting diameter d1, cutting length l2, overall length l1 and shank diameter d2
d1 Cutting diameter / l2 Cutting length / l1 Overall length / d2 Shank diameter / Z Flutes

Cutting length for contact, overall length for installationThe 13 mm diameter has 51 / 102 and 76 / 152 mm cutting/overall length options. Assess sidewall engagement and fixture clearance separately.

Geometric dimensions are not allowable machining-depth or depth-per-pass ratings.

Diameter and length options

Order number
8056031001
Cutting / shank diameter
6 / 6 mm
Flutes / ZrN code
6 flutes / 2235

Check cutting length, overall length, effective clamping length and installed overhang.

Swipe horizontally to see every dimension and the selection buttons.

All standard configurations / Dimensions in mm
Order number d1 l2 l1 d2 Z ZrN code Select
8056031001 6 32 64 6 6 2235
8056031002 6 32 76 6 6 2236
8056031003 6 70 152 6 6 2237
8056031004 10 51 102 10 8 2238
8056031005 13 51 102 13 10 2239
8056031006 13 76 152 13 10 2240
8056031007 16 51 110 16 10 2241
8056031008 19 51 102 19 10 2242
8056031009 19 76 152 19 10 2243
8056031010 20 80 125 20 10 2244
8056031011 25 51 102 25 10 2245
8056031012 25 76 152 25 10 2246

2235–2246 are the source table's ZrN-column codes. Other sizes can be discussed for the part. Confirm geometry, end edges and operating conditions through drawings and trials.

Selection questions

How do flat-end and ball nose core hoggers differ?

Prioritize the flat end for face thinning, pocket floors, steps and sidewall roughing. Assess a ball nose for continuous contours, concave regions and rounded transitions. Select by the actual model and finishing requirements; complex core blocks may use both.

Can the tool enter from above the core?

The center-cutting configuration can connect entry with pocket roughing. Confirm entry method, layers and parameters against the end geometry, core support and machine. This capability is not a general drill specification.

Why are different lengths offered for the same diameter?

Cutting length relates to the cutting-contact region; overall length relates to holding and clearance. Select a longer configuration only when contact height or installation space requires it, avoiding unnecessary overhang.

Can it directly produce the final bonding surface?

This is a roughing tool. Plan finishing, cleaning and inspection for final bonding surfaces, dimensions and surface quality according to the acceptance criteria. The flat-end profile alone does not establish a finished surface.

What information should I provide for selection?

For selection support, provide core grade, pocket size and stock allowance. Include the product name and page URL, the required size or order number, quantity and a drawing. Identify this as the flat-end version because order numbers may overlap with the ball-nose version.

Describe the machining area.
Then select the tool and process.

Share the core, target thickness or pocket dimensions to assess flat-end roughing and subsequent finishing together.

xiufeng@hsitool.com

Select a table size, or describe the required diameter, cutting length and overall length.

Prepare and download a draft on this device, then contact us by email. Nothing is sent automatically.

    product description

    Product overview

    A flat-end profile with multiple roughing teeth for honeycomb face thinning, pocket roughing and sidewall stock removal. Match 6–25 mm diameters and length options to access, cutting contact and holding conditions.

    Selection considerations

    A flat end suits planar and stepped regions, but pocket corners in the XY plane still retain a radius governed by cutter diameter. Confirm the end-edge corner geometry from the drawing. For smaller internal corners, check access and rigidity with a smaller diameter; a flat end does not create arbitrary sharp internal corners.

    Application checks

    Prioritize the flat end for face thinning, pocket floors, steps and sidewall roughing. Assess a ball nose for continuous contours, concave regions and rounded transitions. Select by the actual model and finishing requirements; complex core blocks may use both.

    Discuss your application

    For product selection, send CompTex your core grade, pocket size and stock allowance. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    METRIC
    Order Number d1 l2 l1 d2 Z ZrN
    8056031001 6 32 64 6 6 2235
    8056031002 6 32 76 6 6 2236
    8056031003 6 70 152 6 6 2237
    8056031004 10 51 102 10 8 2238
    8056031005 13 51 102 13 10 2239
    8056031006 13 76 152 13 10 2240
    8056031007 16 51 110 16 10 2241
    8056031008 19 51 102 19 10 2242
    8056031009 19 76 152 19 10 2243
    8056031010 20 80 125 20 10 2244
    8056031011 25 51 102 25 10 2245
    8056031012 25 76 152 25 10 2246
    Other sizes available upon request. Contact CompTex.

    Leave Your Message