Leave Your Message

8-Flute CVD Diamond Low-Helix Router Bit for CFRP Trimming

8-Flute CVD Diamond
Low-Helix Router Bit
for CFRP Trimming

Efficient stock removal, with roughing and finishing versatility.

Solid carbide with a CVD diamond coating, eight low-helix flutes and fine teeth. For trimming, external contours and opening sidewalls in CFRP and other composites. Use the same tool for stock removal and contour finishing, adjusting cutting conditions and toolpaths to balance productivity, dimensions and edge quality.

Product Inquiry
CompTex 8-flute CVD diamond low-helix fine-tooth router
Solid Carbide · CVD Diamond Coating · 8 Low-Helix Flutes
Cutting Diameter d1
4–20 mm
Cutting Length l2
16–50 mm
Flutes Z
8 flutes

Efficient Stock Removal

Fine teeth and helical chip channels support efficient stock removal at panel edges and openings, with stable workholding and effective evacuation.

Roughing & Finishing Versatility

Use one tool type for stock removal and light finishing. Adjust engagement, depth and feed for each stage to reduce tool changes.

CVD Diamond Wear Resistance

For abrasive fiber composites. Monitor cutting-edge wear, load and part quality when setting tool-use and replacement criteria.

Sizes & Specifications

Eleven standard sizes, 4–20 mm, all with eight flutes.
6 mm and 8 mm offer different cutting lengths; select for reach and rigidity.

Official router dimensional drawing showing d1, l2, l1 and d2
d1
Cutting diameter
l2
Cutting length
l1
Overall length
d2
Shank diameter
Z
Flutes: 8 for all sizes

11 sizes

Scroll horizontally to view the full size table.

Eleven CVD diamond low-helix fine-tooth router sizes. Lengths in mm; Z is flute count.
Order Number d1 l2 l1 d2 Z Select size
4056050001 4 16 60 4 8
4056050002 5 18 60 5 8
4056050003 6 20 60 6 8
4056050004 6 30 75 6 8
4056050005 6 50 100 6 8
4056050006 8 25 70 8 8
4056050007 8 50 100 8 8
4056050008 10 30 75 10 8
4056050009 12 35 85 12 8
4056050010 16 40 100 16 8
4056050011 20 45 100 20 8
Metric · Lengths in mm · Z is a countAsk About Other Sizes

Cutting length is not a recommended single-pass depth. Use the shortest effective length that provides access; confirm overhang, radial load and evacuation for the actual setup.

Parts & Applications

From plate components to shell perimeters,
balance stock removal, contour dimensions and edge quality.

Profiled carbon-fiber sheet parts and openings, shown as a selection reference
Profiled Carbon-Fiber Parts Reference

Illustrates part features, not machining results from this model.

CFRP · Carbon-fiber laminates

Structural Plates, Mounting Plates & Brackets

For external profiles, assembly windows and mounting notches in plate components. Remove the main stock, then finish the contour to balance cycle time, sidewall dimensions and edge integrity.

Check panel thickness, layup, remaining stock and support around windows and corners.

CFRP · Molded composite shells

Cover Edges & Shell Assembly Openings

Evaluate for cover trimming, access openings and assembly-opening sidewalls. The main cutting features are the perimeter and sidewalls; complex shells also require checks of tool-axis clearance and local support.

Check clamping, overhang and toolpath direction at thin or unsupported edges to manage fuzzing, chatter and delamination risk.

GFRP · Glass-fiber composites

Insulation Plates, Supports & Equipment Panels

Evaluate for stock removal and finishing on plate profiles, windows and mounting notches. Set cutting conditions for the resin, reinforcement and fillers, then assess sidewall texture, edge burrs and dimensional stability.

CFRP is the primary application. Confirm GFRP suitability for the material grade, setup and first-part trial.

One Tool, from Stock Removal to Finishing

One tool type with roughing and finishing versatility.
Plan each stage for the allowance and quality requirements.

Stock Removal

Maintain a Stable Load for Efficient Cutting

Match radial engagement, cutting depth and feed to the material, panel thickness and workholding. Keep the load steady on continuous contours, avoid sudden full engagement at corners and openings, and clear debris from the cutting zone.

Contour Finishing

Use a Uniform Light Allowance for Edges & Dimensions

Leave a uniform finishing allowance where surface or fit requirements are higher. Adjust the final toolpath and feed, then inspect both face edges, sidewall marks and contour dimensions. Refine the process from the first-part results.

Coordinate Evacuation & Support

Use effective dust extraction and debris clearing with the helical grooves. At corners, deep walls and thin edges, monitor debris retention, heat and vibration. Do not increase cutting conditions based only on flute count or tooth appearance.

Selection FAQ

Does roughing and finishing versatility mean one pass for every part?

It means the same tool type can cover stock removal and contour finishing. It does not mean every material or tolerance can be completed in one pass. Suitable stock, thickness and support may simplify the process; higher surface or dimensional requirements may still need a final light finishing pass.

What do the fine teeth and helical grooves do?

Fine teeth provide multiple local cutting edges for continuous stock removal and edge finishing. Helical grooves provide paths for debris to leave the cut. Fine teeth do not justify unlimited feed increases: confirm conditions against load, evacuation, heat and cutting-edge condition.

Is the low-helix design suitable for thin panels?

The official page and catalogue specify an 8° low helix to balance debris evacuation and axial pull. Thin panels and shells still require secure clamping and backing support. Confirm the process for the layup, fiber direction, unsupported length and quality of both face edges.

Do all eleven sizes have eight flutes?

Yes. All eleven listed sizes specify Z=8. The number of local fine teeth is different from the flute count Z. Confirm the manufacturer's definition of effective cutting teeth before setting feed per tooth. The 6 mm and 8 mm diameters have different cutting lengths; check the order number and overall length together.

Can cutting length determine single-pass depth?

No. Cutting length describes tool geometry, not a recommended single-pass depth. Set machining depth around overhang, radial engagement, workpiece support, evacuation and machine load. Confirm stock-removal and finishing conditions separately.

Product Inquiry

Share the material, stock allowance and contour requirements.
Confirm the size and roughing/finishing plan with us.

xiufeng@hsitool.com

Select a size above, or describe your stock-removal, contour or opening requirements.

Creates a draft on this device. No information is submitted or uploaded.

    product description

    Product overview

    Solid carbide with a CVD diamond coating, eight low-helix flutes and fine teeth. For trimming, external contours and opening sidewalls in CFRP and other composites. Use the same tool for stock removal and contour finishing, adjusting cutting conditions and toolpaths to balance productivity, dimensions and edge quality.

    Selection considerations

    This tool type can be assessed for both stock removal and contour finishing. It does not mean every material or tolerance can be completed in one pass. Suitable stock, thickness and support may simplify the process; higher surface or dimensional requirements may still need a final light finishing pass.

    Application checks

    Fine teeth provide multiple local cutting edges for continuous stock removal and edge finishing. Helical grooves provide paths for debris to leave the cut. Fine teeth do not justify unlimited feed increases: confirm conditions against load, evacuation, heat and cutting-edge condition.

    Discuss your application

    For product selection, send CompTex your laminate thickness, edge quality and cutting conditions. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    Order Number d1 l2 l1 d2 Z Diamond
    4056050001 4 16 60 4 8 5986
    4056050002 5 18 60 5 8 5987
    4056050003 6 20 60 6 8 5988
    4056050004 6 30 75 6 8 5989
    4056050005 6 50 100 6 8 5990
    4056050006 8 25 70 8 8 5991
    4056050007 8 50 100 8 8 5992
    4056050008 10 30 75 10 8 5993
    4056050009 12 35 85 12 8 5994
    4056050010 16 40 100 16 8 5995
    4056050011 20 45 100 20 8 5996

    Leave Your Message