Leave Your Message

PCD One-Shot Drilling Countersinking Step Drill for CFRP

Brazed PCD drill tip · Combined drilling & countersinking

PCD One-Shot Drilling Countersinking Step Drill for CFRP

Brazed PCD inserts form the front drilling edges; the rear section produces the countersink. For CFRP fastener holes, this stepped tool connects drilling and countersinking in one machining cycle, reducing tool changes and repeated alignment.

Match the front section and countersink penetration to the target bore, hole quality and fastener fit. Assess the fibers at the hole entrance alongside edge condition and seat-depth consistency during repeated machining.

Discuss Your PCD Drill–Countersink
PCD one-shot drill–countersink with a cylindrical shank at left, countersinking shoulder and brazed PCD drill tip at right
Cylindrical shank / Countersinking section / Brazed PCD drill tip
Drill diameter D
3–13mm
Cutting edges Z
2+2
Listed sizes
11
Drill tip
Brazed PCD

PCD at the cutting edges.
Drilling through to the seat.

This version uses brazed PCD inserts to form the front drilling edges. The front drill and rear countersinking section retain their combined function; choose the structure and dimensions to suit the part.

What does “brazed tip” mean?It describes how the PCD cutting segments are joined to the tool body. Assess material abrasiveness, hole acceptance criteria, continuous hole count and edge-maintenance needs together.

Brazed tip
for drilling
PCD inserts form the front drilling edges for abrasive composites such as carbon-fiber and glass-fiber laminates. Stable workholding and appropriate feed support control of the bore, entry fibers and exit condition as the tip breaks through.The front section actively cuts the bore; it is not simply a pilot for locating in an existing hole.
2+2 edges
for two stages
Two front edges drill the hole; two rear edges machine the countersink. A shared tool axis reduces changes between separate operations. Match the countersink angle, diameter and depth to the fastener and part drawing.Coordinate laminate thickness, front-section length and the point at which the countersinking shoulder engages.
Stable support
for bore and seat
Monitor both the drilling and countersinking edges across a hole pattern. Check hole diameter, exit fibers, seat depth and fastener flushness. Include panel support, spindle runout and debris removal in the process plan.One setup supports process continuity; actual bore and seat quality still require trial machining and inspection.
How does it compare with a solid PCD tip?

Both versions combine drilling and countersinking, with a different front cutting structure. Assess the material, hole quality, batch size and budget. Compare tool life and economics under matched conditions rather than inferring them from tip construction alone.

What parts can it machine?

Start with the composite connection: coordinate bore formation, the entrance seat and fastener assembly requirements.

Technician smoothing composite skin around an aircraft instrument fairing, showing a curved-skin manufacturing scene
Curved composite skins and fairingsConsider the local surface normal, connection edges, hole layout and access for workholding.
Carbon-fiber composites
Skins, fairings and lightweight joining plates
Glass-fiber composites
Instrument covers, access panels and mounting plates
SMC/BMC composites
Molded housings, mounting bosses and flanges
CFRP skins, fairings and joining plates

Fastener-hole patterns for flush assembly

Evaluate composite skins, fairings and joining plates that need both a drilled bore and a countersunk seat. On curved or thin sections, establish hole location and feed direction, then coordinate tip breakthrough with rear countersinking. Inspect the entrance profile around the hole and fastener-head contact.

Selection priorities: fiber layup, local curvature, thickness, seat angle, edge distance and backing support.

GFRP enclosures and removable covers

Screw holes with a controlled bore and seat

Assess countersunk connections in instrument covers, access panels and glass-fiber mounting plates. Glass-fiber abrasion and resin condition affect the cutting edges and surface. Check the bore and exit during drilling, then the conical seat and visible entrance during countersinking.

Selection priorities: resin and fiber, surface coatings, chipping, loose fibers and screw-head type.

SMC/BMC molded connection features

Assembly holes in housing bosses and flanges

Evaluate a combined operation for molded housings, flanges and mounting bosses according to filler, wall thickness and fastening design. Check the remaining thickness after countersinking, edge distance and support rigidity alongside the required bore and seat.

Selection priorities: filler abrasiveness, local thickness changes, clamping distortion and the load-bearing section.

Applications are selection references. The photograph shows composite-skin manufacturing, not this tool in use, its machining results or a customer case. Metal stacks, inserts and sandwich structures require separate assessment of the contact layers and support conditions.

11 sizes. Select the bore and overall length.

Check D, L1 and L4, then review the full geometry against the seat, tip breakthrough and available installation space.

Official PCD drill–countersink dimensional schematic showing D, L1, L4, Asv and shank diameter d h6
D
Front drilling diameter, mm
L1
Overall tool length in the drawing, mm
L4
Illustrated front-section length, not permitted hole depth
ASV
Countersink-angle configuration; Asv in the drawing
Z
2+2: two drilling edges + two countersinking edges
Ød h6
Shank annotation; no numeric shank diameter is listed
PCD
Configuration code, not a price
Check angle and travel together

The source lists 100°/130°; confirm the actual countersink configuration to the drawing. L4 is not a recommended hole depth or permitted panel thickness. D±0.01 is a tool dimension, not a finished-hole tolerance guarantee.

Scroll horizontally to view all dimensions and order numbers.

Dimensions in mm; ASV in degrees. PCD entries are configuration codes.
Order number D L1 L4 ASV Z PCD Selection
7056040001 3 80 30 100°/130° 2+2 30025
7056040002 4 80 30 100°/130° 2+2 30026
7056040003 5 90 40 100°/130° 2+2 30027
7056040004 6 90 40 100°/130° 2+2 30028
7056040005 7 100 40 100°/130° 2+2 30029
7056040006 8 100 40 100°/130° 2+2 30030
7056040007 9 100 40 100°/130° 2+2 30031
7056040008 10 100 40 100°/130° 2+2 30032
7056040009 11 100 40 100°/130° 2+2 30033
7056040010 12 100 40 100°/130° 2+2 30034
7056040011 13 100 40 100°/130° 2+2 30035

Listed diameters run from D3 to D13. D3/D4: L1 80 mm, L4 30 mm. D5/D6: L1 90 mm, L4 40 mm. Other listed sizes: L1 100 mm, L4 40 mm. Confirm unlisted shank diameters, countersink outside diameters and other dimensions.

Brazed-tip drill–countersink selection

How does the brazed tip differ from a solid PCD tip?

This version uses brazed PCD inserts for the front drilling edges; the solid-tip version uses a solid PCD cutting tip. Both combine drilling and countersinking. Compare actual geometry, hole requirements, batch size and performance under matched conditions rather than assuming a tool-life or cost difference from the name.

Are the brazed inserts user-replaceable?

The PCD cutting segments are brazed to the tool body. This does not describe indexable inserts that the operator can replace. Confirm the maintenance method against the actual tool structure and wear condition.

Does one cycle mean one feed rate throughout?

Drilling and countersinking have different contact diameters, loads and finish requirements. Assess feed and depth control for each stage according to the material, thickness, tool and machine. A combined tool alone does not determine a single parameter set for the whole cycle.

How should I interpret L4 and 100°/130°?

L4 is the illustrated front-section length. Panel thickness must also account for tip breakthrough, shoulder penetration and rear clearance. The source 100°/130° entries describe countersink-angle configurations; select against the fastener and full drawing. They are not presented as separate drill-point and countersink angles.

Start with the hole and seat requirements.

Share the material, thickness and fastener details to match the brazed tip, drill–countersink geometry and working travel.

xiufeng@hsitool.com

Select a listed size, or start with your target hole and countersink requirements.

Creates a local draft only; nothing is submitted. Download the TXT file to use in an email inquiry.

    product description

    Product overview

    Brazed PCD inserts form the front drilling edges; the rear section produces the countersink. For CFRP fastener holes, this stepped tool connects drilling and countersinking in one machining cycle, reducing tool changes and repeated alignment.

    Selection considerations

    This version uses brazed PCD inserts for the front drilling edges; the solid-tip version uses a solid PCD cutting tip. Both combine drilling and countersinking. Compare actual geometry, hole requirements, batch size and performance under matched conditions rather than assuming a tool-life or cost difference from the name.

    Application checks

    The PCD cutting segments are brazed to the tool body. This does not describe indexable inserts that the operator can replace. Confirm the maintenance method against the actual tool structure and wear condition.

    Discuss your application

    For product selection, send CompTex your hole diameter, countersink angle and laminate thickness. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    Order Number D L1 L4 ASV Z PCD
    7056040001 3 80 30 100°/130° 2+2 30025
    7056040002 4 80 30 100°/130° 2+2 30026
    7056040003 5 90 40 100°/130° 2+2 30027
    7056040004 6 90 40 100°/130° 2+2 30028
    7056040005 7 100 40 100°/130° 2+2 30029
    7056040006 8 100 40 100°/130° 2+2 30030
    7056040007 9 100 40 100°/130° 2+2 30031
    7056040008 10 100 40 100°/130° 2+2 30032
    7056040009 11 100 40 100°/130° 2+2 30033
    7056040010 12 100 40 100°/130° 2+2 30034
    7056040011 13 100 40 100°/130° 2+2 30035

    Leave Your Message