Leave Your Message

Straight Flute PCD Drill Bit for Precision CFRP Drill

Straight Flute PCD Drill Bit for Precision CFRP Drill

Brazed PCD cutting edges on a solid carbide body provide a wear-resistant drilling option for carbon fiber panels and molded composites.

From panel fastening holes to mounting holes in molded parts, match the tool to the working depth, evacuation method and backing support needed for your hole-quality requirements.

Discuss your drilling application
CompTex straight flute drill with brazed PCD cutting edges and a solid carbide body
Brazed PCD edges / Solid carbide body / Two straight flutes
Diameter d1
3–13mm
Flutes z
2flutes
Cutting structure
Brazed PCD
Flute form
Straight

Brazed PCD cutting edges.
Straight flute channels.

Cutting edges, body support and debris removal work together. Assess hole diameter, wall condition and entry/exit quality against one set of acceptance criteria.

Inspection prioritiesEntry frayingDiameter & wall finishExit delamination
Brazed PCD edges
PCD cutting segments are brazed to the body to provide wear-resistant edges at the main cutting positions. The solid carbide body provides support and clamping.Confirm regrinding and maintenance against the actual construction and wear condition.
Axial flute channels
The flutes extend along the tool axis, leaving a path for debris removal. Assess extraction, air flow or another suitable clearing method against part thickness and cycle requirements.For deeper holes, flute form alone does not establish evacuation capacity.
Support at breakthrough
Check layup and clamping at entry, residue and runout inside the hole, and the remaining plies and backing at exit. Use first-part results to refine feed and tool-change criteria.Straight flutes do not eliminate axial thrust; hole-edge quality still depends on the process.

Which parts can it drill?

Evaluate fastening, locating and mounting holes in composite panels and molded parts. Confirm suitability against the actual material and hole-quality requirements.

Composite panel held in assembly tooling; the light-colored frame is the fixture
Composite panel & assembly fixture referenceAssess hole position, edge distance and support access. The light-colored frame is assembly tooling.

Material selection range

CFRP
Carbon fiber laminates and molded composites
GFRP
Glass fiber panels, glass-epoxy and laminated insulation
SMC / BMC
Molded parts; confirm fiber, fillers and cure condition
Graphite
Assess hole geometry, edge strength and dust extraction
CFRP / Laminated composite panels

Joining plates, doublers & mounting panels

Consider fastening, locating and grouped mounting holes. Near an edge or in thin layups, confirm clamping and backing first, then inspect entry fraying, diameter and exit condition.

Selection checks: ply orientation, edge distance, thickness and hole pattern

GFRP / Glass fiber reinforced insulation parts

Insulation partitions, terminal supports & fixing plates

Evaluate assembly-hole drilling in glass fiber reinforced parts. During repeat drilling, monitor edge wear from abrasive fibers and fillers, and check for wall scoring and local chipping alongside evacuation conditions.

Selection checks: fibers and fillers, wall requirements and post-drilling cleaning

Molded composites / SMC and BMC

Molded mounts, housings & rib holes

Where local thickness varies or fixture access is limited, confirm entry direction, hole depth and tool overhang. Assess residue near the cutting zone, edge integrity and batch performance using the actual material formulation.

Selection checks: local thickness, backing stiffness, usable reach and evacuation path

Parts and materials are selection references. The image is not a machining result or customer case for this drill. Metal stacks, sandwich structures and special fillers require separate assessment.

11 standard sizes.
Diameters from 3 to 13 mm.

All sizes have two flutes. Select for hole diameter, clamping and actual overhang, then confirm working depth and evacuation space.

Original straight flute PCD drill dimension drawing showing d1, l1, l2 and d2
d1
Drill diameter
l1
Overall length
l2
Drawing cutting-section length
d2
Shank diameter
z
Flute count
Units
All lengths in mm

l2 is the cutting-section length shown in the original drawing, not a drilling-depth rating. Confirm usable cutting reach, overhang, evacuation and breakthrough clearance.

Swipe to view the complete size table.

Lengths in mm; z = flute count
Order number d1 l1 l2 d2 z Selection
7056037001 3 60 30 4 2
7056037002 4 60 30 4 2
7056037003 5 70 40 6 2
7056037004 6 70 40 6 2
7056037005 7 80 40 8 2
7056037006 8 80 40 8 2
7056037007 9 80 40 10 2
7056037008 10 80 40 10 2
7056037009 11 80 40 12 2
7056037010 12 80 40 12 2
7056037011 13 80 40 14 2

Drill diameter d1 and shank diameter d2 differ on some sizes. Check the complete order number. Other dimensions can be reviewed against your drawing.

Straight flute PCD drill selection

How does selection differ from a helical flute drill?

Straight flutes extend axially and do not have the helical form used to convey debris. Compare working depth, clearing methods and backing support. Flute form alone does not determine the better result, and a straight flute does not mean zero axial thrust.

What does brazed PCD construction mean?

Brazed PCD cutting segments perform the main cutting, supported by a solid carbide body. Confirm the specific brazing process and maintenance arrangements for the actual configuration; this is not an indexable insert system.

Can it be used for deeper holes?

Confirm usable cutting reach, overhang, in-hole evacuation and breakthrough clearance separately. l2 is the drawing cutting-section length, not an allowable drilling depth. Use trials where needed to establish clearing and feed strategies.

How should precision drilling be evaluated?

Define diameter tolerance, hole-wall condition, entry fraying and exit delamination criteria first. Carry out first-part inspection with the actual runout, clamping, layup and edge condition. Set tolerances and inspection methods against the part drawing and machining conditions.

What information helps with selection?

Provide material grade, resin and layup, hole diameter and depth, holes per part and batch size, plus machine, holder, backing and clearing conditions. For entry, exit or hole-wall defects, include photographs and the current process.

Discuss your straight flute drilling setup

Share the layup, hole depth and acceptance criteria. Review evacuation, backing support and clamping conditions to select a suitable configuration.

xiufeng@hsitool.com

Select a standard size, or start with your material, hole depth and acceptance criteria.

Creates a draft on your device only. Nothing is submitted. Download the TXT file and contact us by email.

    product description

    Product overview

    CompTex's straight flute PCD drill combines brazed polycrystalline diamond cutting edges with a solid carbide body and two straight flutes. It is designed for drilling fastening, locating and mounting holes in CFRP panels and molded composite parts. The standard range includes 11 drill diameters from 3 to 13 mm.

    Selection considerations

    Select the drill around your material, hole diameter, part thickness and hole-quality requirements. Check the shank diameter against your holder and allow sufficient reach and breakthrough clearance. The drawing's cutting-section length describes tool geometry; usable drilling depth also depends on clamping, clearance and debris removal.

    Application checks

    Straight flutes provide axial channels for debris removal. Hole quality still depends on cutting-edge condition, runout, feed, workholding, backing support and dust extraction. Check entry fraying, exit delamination, hole diameter and wall condition during first-part inspection before setting production parameters.

    Discuss your application

    For help selecting a size, send CompTex your material and layup, required hole diameter and depth, quantity, and machine setup. Include a drawing or photographs of any current drilling defects so we can review your application and recommend a suitable configuration.

    Product Parameters

    METRIC
    Order Number d1 l1 l2 d2 z PCD
    7056037001 3 60 30 4 2 30025
    7056037002 4 60 30 4 2 30026
    7056037003 5 70 40 6 2 30027
    7056037004 6 70 40 6 2 30028
    7056037005 7 80 40 8 2 30029
    7056037006 8 80 40 8 2 30030
    7056037007 9 80 40 10 2 30031
    7056037008 10 80 40 10 2 30032
    7056037009 11 80 40 12 2 30033
    7056037010 12 80 40 12 2 30034
    7056037011 13 80 40 14 2 30035
    Other sizes available upon request. Contact CompTex.

    Leave Your Message