Leave Your Message

Diamond Coated Solid Carbide Finishing End Mill

Diamond Coated Solid
Carbide Finishing End Mill

A versatile choice for composite profiles, slot walls and steps.

A four-flute, flat-end design with a solid carbide body for everyday composite machining. Select from this range for carbon-fiber, glass-fiber and FR4 parts, with DLC or diamond coating matched to the material and operation.

Discuss your part
CompTex 4-flute solid carbide flat-end finishing tool, original product image
Solid carbide · Four-flute flat end · DLC / diamond coating options
Cutting diameter d1
3–20 mm
Flute count Z
4 flutes
Listed sizes
13 sizes
A versatile selection range

CFRP / GFRP & FR4 / Aramid laminatesMatch coating, cutting edge and setup to the material. Assess aramid separately.

Dimensions & sizes

13 listed sizes: match diameter and cutting length to the feature.
Alternative cutting lengths are retained from the source data.

Original CompTex catalog drawing: d1 cutting diameter, l2 cutting length, d2 shank diameter, l1 overall length; Z equals 4 flutes
Original catalog dimension reference for this tool.
d1
Cutting diameter
l2
Cutting length
d2
Shank diameter
l1
Overall length
Z
Flute count
DLC / Diamond
Coating codes

13 listed sizes

Scroll sideways to view the complete dimension table.

13 sizes of the four-flute general-purpose finishing end mill. Lengths in millimeters; Z is a flute count; coating codes have no unit.
Order number d1 l2 d2 l1 Z DLC code Diamond code* Select size
3056030001 3 10 4 40 4 4101 6101
3056030002 4 15 6 50 4 4102 6102
3056030003 5 15 6 50 4 4103 6103
3056030004 6 15 6 50 4 4104 6104
3056030005 6 25 6 64 4 4105 6105
3056030006 8 15 8 60 4 4106 6106
3056030007 8 30 8 76 4 4107 6107
3056030008 10 20 10 73 4 4108 6108
3056030009 10 40 10 93 4 4109 6109
3056030010 12 20 12 73 4 4110 6110
3056030011 12 40 12 96 4 4111 6111
3056030012 20 20 20 80 4 4112 6112
3056030013 20 30 20 80 4 4113 6113
Metric · Lengths: mm · Flute counts and codes have no unitDiscuss other sizes

* Diamond codes follow the original Diamond column. Confirm coating process, edge preparation and complete ordering configuration. The 6, 8, 10, 12 and 20 mm diameters each have two cutting lengths.

Parts this tool can help machine

Understand versatility through actual part types.
Use these parts and operations as a selection guide.

Carbon-fiber-reinforced polymer (CFRP)

Carbon-fiber mounting plates and brackets

Drone mounting plates, equipment connection plates and lightweight brackets machined from composite sheet.

Selection focus: external profiles, open sidewalls and assembly steps.

Review layup direction, thin-wall support, face delamination and edge fiber condition.

Glass-fiber composites (GFRP) / FR4 laminates

Fiberglass insulation plates and mounting parts

Electrical support plates, insulating separators, electronics mounting plates and parts with locating slots.

Selection focus: profile trimming, locating-slot walls and local stepped features.

Review resin system, plate thickness, slot depth, debris removal and edge and wall requirements.

Aramid-reinforced laminates; dedicated assessment

Aramid laminate protective panels

Contour-machining selection for aramid laminate guards and equipment protection panels.

Assess trimming feasibility against fiber condition, resin and layup before choosing edge preparation and toolpath.

Aramid can fuzz. Thin laminates and honeycomb cores require separate tool selection; edge results depend on the application.

Selection references only. Confirm the material and setup through application review and representative trials; these examples are not validated machining cases.

Match the coating to the material

Choose the configuration for the job.
DLC and Diamond follow the product's source options.

DLC

Diamond-like carbon coating

Assess edge preparation and cutting conditions against the resin system, adhesion tendency and required part surface.

Diamond coating

Listed as Diamond

A selection option for abrasive composites. Confirm the coating process, thickness and cutting-edge preparation when ordering.

These are different coating systems. Tool life, efficiency and finish depend on the application.

Put versatility to work

Select size for the feature, then match path, load and workholding.
Stable results depend on the specific machining conditions.

Profiles and sidewalls

Side-mill external profiles or open walls, matching cutting direction and finishing allowance to the layup and fixture. Provide effective support at thin walls and unsupported edges.

Slot walls and steps

Choose diameter and reach for slot width, depth and internal corners. Review load and debris removal for narrow, deep or full-width slots. Confirm end-cutting geometry and entry method before axial entry.

Choose the cutting length you need

The 6, 8, 10, 12 and 20 mm diameters each have two cutting lengths. Prefer the shortest cutting length and overhang that reach the feature; assess rigidity when a longer tool is needed.

Batch and changeover work

Build a tool-selection list for common materials and operations, then identify configurations that can be shared.One series can simplify selection. Different materials may still need separate tools and cutting data; no fixed reduction in tool changes or inventory is assumed.

Selection questions

What makes this a general-purpose option?

It is a starting point for several non-metallic composites and common profiles, sidewalls, slot walls and steps. Material, coating, cutting length and toolpath still need to be matched; one configuration will not suit every material or setup.

Can the same size be used across different composites?

This tool series can be assessed for CFRP, GFRP, FR4 and aramid laminates. When changing material, review the coating, cutting edge, resin heat sensitivity and cutting data. Fiber fuzzing and part support deserve particular attention with aramid.

How do I choose between four and eight flutes?

This four-flute range emphasizes versatility across materials and operations. The eight-flute fiberglass finishing tool focuses on finishing and feed capability under suitable conditions. Compare cutting load, chip space, diameter, machine capability and workholding, then validate on a representative part.

How do I choose DLC or diamond coating?

DLC is diamond-like carbon; the other option is listed as Diamond in this product's source data. Select against material abrasiveness, resin adhesion and required edge quality. Confirm the coating process, thickness and edge preparation when ordering.

Is it suitable for high-speed machining?

The manufacturer identifies high-speed cutting as a design direction. Confirm spindle speed, feed per tooth and cutting depth for the material, diameter, overhang and machine. Plan suitable dust extraction, cooling or air delivery, and part support. Cutting data and surface finish need application-specific validation.

What information should I provide for selection?

For selection support, provide material, finishing allowance and surface requirements. Include the product name and page URL, the required size or order number, quantity and a drawing.

Discuss your part

Start with your material and machining features.
We can review the four-flute size, coating and trial approach.

xiufeng@hsitool.com

Choose a listed size above, or describe your machining requirements.

Creates a draft on your device. No information is submitted or uploaded.

    product description

    Product overview

    A four-flute, flat-end design with a solid carbide body for everyday composite machining. Select from this range for carbon-fiber, glass-fiber and FR4 parts, with DLC or diamond coating matched to the material and operation.

    Selection considerations

    This four-flute series is a starting point for several non-metallic composites and common profiles, sidewalls, slot walls and steps. Material, coating, cutting length and toolpath still need to be matched; one configuration will not suit every material or setup.

    Application checks

    This tool series can be assessed for CFRP, GFRP, FR4 and aramid laminates. When changing material, review the coating, cutting edge, resin heat sensitivity and cutting data. Fiber fuzzing and part support deserve particular attention with aramid.

    Discuss your application

    For product selection, send CompTex your material, finishing allowance and surface requirements. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    METRIC
    Order Number d1 l2 d2 l1 Z DLC Diamond
    3056030001 3 10 4 40 4 4101 6101
    3056030002 4 15 6 50 4 4102 6102
    3056030003 5 15 6 50 4 4103 6103
    3056030004 6 15 6 50 4 4104 6104
    3056030005 6 25 6 64 4 4105 6105
    3056030006 8 15 8 60 4 4106 6106
    3056030007 8 30 8 76 4 4107 6107
    3056030008 10 20 10 73 4 4108 6108
    3056030009 10 40 10 93 4 4109 6109
    3056030010 12 20 12 73 4 4110 6110
    3056030011 12 40 12 96 4 4111 6111
    3056030012 20 20 20 80 4 4112 6112
    3056030013 20 30 20 80 4 4113 6113
    Other sizes available upon request. Contact CompTex.

    Leave Your Message