Leave Your Message

Serrated CVD Diamond End Mill for Carbon Composite Trimming

Serrated CVD Diamond
End Mill for Carbon
Composite Trimming

Fine-tooth cutting for profile accuracy and surface finish.

For profile finishing, sidewall machining and edge trimming in carbon-fiber and glass-fiber composites. Fine cutting teeth work with helical chip-clearance flutes to address dimensional, tool-mark and edge-quality requirements while maintaining a path for chips to leave the cut.

Discuss your application
CompTex fine-tooth carbide composite end mill showing serrated cutting teeth and helical flutes
Fine cutting teeth · Helical flutes · Carbide substrate
Cutting diameter d1
4–16 mm
Cutting length l2
12–40 mm
Listed sizes
6

Fine-tooth finishing

Fine cutting geometry for profiles and sidewalls, with attention to dimensions, tool marks and clean fiber cutting.

Helical chip clearance

A continuous chip-exit path. Match the toolpath and extraction setup to limit buildup and the effects of recutting.

CFRP and GFRP

For carbon-fiber and glass-fiber composites. Match the setup to the resin system, layup, thickness and finished-part requirements.

Dimensions & specifications

6 listed sizes, with cutting diameters of 4–16 mm.
CVD diamond or DLC to suit your application.

Original dimension drawing: d1 cutting diameter, l2 cutting length, l1 overall length and d2 shank diameter
Original product drawing with the supplied tooth geometry and dimension symbols.
d1
Cutting diameter
l2
Cutting length
l1
Overall length
d2
Shank diameter
Z*
Original flute-count notation

6 sizes

Scroll horizontally to view the complete table.

6 fine-tooth helical end mill sizes. Length dimensions in mm; Z has no length unit.
Order number d1 l2 l1 d2 Z* Select size
4056037001 4 12 50 4 4
4056037002 6 18 50 6 4
4056037003 8 22 60 8 6
4056037004 10 25 75 10 6
4056037005 12 32 80 12 8
4056037006 16 40 100 16 8
Metric · Lengths in mm · Z is dimensionlessDiscuss other sizes

* Z retains the original 4 / 6 / 8 notation; do not infer the total number of individual tooth tips. Cutting length is geometric. Confirm cutting depth, finishing allowance, entry method and parameters for the setup.

What can this tool machine?

For fine trimming of sidewalls, openings and assembly edges.
Part categories and imagery are selection references.

Carbon-fiber-reinforced polymer (CFRP)

Carbon-fiber panels and connecting plates

Instrument panels, mounting plates, flat brackets and lightweight connecting plates with requirements for external dimensions, opening contours and sidewall tool marks.

Operations: external profile finishing, accessible opening edges and mating-edge machining.

Check layup, thickness, finishing allowance and secure workholding for small parts.

Glass-fiber-reinforced polymer (GFRP)

Glass-fiber insulation and support plates

Insulating mounting plates, equipment support plates and composite structural spacers requiring consistent contours, sidewall surfaces and burr control.

Operations: profile finishing, connecting edges and accessible slot sidewalls.

Check resin, fiber content and heat effects. Assess copper-clad boards and metal stacks separately.

Molded CFRP / GFRP components

Molded covers and mounting flanges

Composite protective covers, equipment housings and molded parts with mounting flanges, focusing on accessible perimeters, openings and mounting edges.

Operations: molded-edge finishing, contour transitions and assembly-edge trimming.

Check thin-wall support, overhang and fixture clearance. Shell-edge finishing differs from ball-nose 3D surface machining.

Application references are not validated customer cases. Assess thin walls, copper-clad boards, honeycomb, sandwich structures and composite/metal stacks separately.

Coatings for material and finish

CVD diamond and DLC are available options.
Evaluate cutting behavior and replacement criteria.

CVD diamond coating

For abrasive fiber composites

Evaluate wear resistance against the abrasive nature of carbon and glass fibers. Track cutting-edge wear and changes in finished surfaces during batch production.

Confirm the supplied coating configuration when ordering. No universal tool-life multiplier or fixed cutting parameters are specified.

DLC coating

Diamond-like carbon option

Assess compatibility with the fiber/resin system and its friction and adhesion behavior. Compare with the diamond option through representative cutting trials.

DLC and diamond are distinct coatings. Evaluate material compatibility, wear behavior and finished-part requirements separately.

Confirm the coating process, thickness and applicable parameters with the supplied configuration. Compare durability under equivalent cutting conditions.

Three checks for finishing quality

Inspect dimensions, sidewalls and both edges together.
Confirm the process against the drawing and trial results.

Dimensions and profile

Check external dimensions, opening contours and mating features. Include tool runout, actual overhang, wear and finishing allowance in the assessment.

Sidewall and surface

Inspect tool marks, local scratches, resin surface condition and sidewall consistency. Measure specified roughness at agreed locations; photographs do not establish a roughness value.

Upper and lower edges

Inspect burrs, fiber pullout and delamination separately at both edges. Support thin walls and narrow edges, then validate on representative layups, thicknesses and contours.

Include in your application review

Fiber/resin system, layup, thickness, finishing allowance, dimensional tolerances, surface requirements, workholding and extraction.Confirm spindle speed, feed, cutting depth and entry method for the tool size and setup.

Selection questions

How does this fine-tooth design compare with the coarse-tooth router?

This version focuses on profile finishing, sidewalls and edge-surface requirements. The coarse-tooth version focuses more on cutting and stock removal. Select around allowance, surface requirements, material and workholding; use a representative trial to decide whether separate roughing and finishing passes are needed.

Can it machine carbon-fiber and glass-fiber composites?

Yes. CFRP and GFRP are the main application materials. Selection also needs the resin system, layup, thickness and quality requirements. Assess copper-clad boards, honeycomb, sandwich structures and composite/metal stacks separately.

What accuracy and surface roughness can I expect?

No numerical tolerance or roughness result is available for this tool under defined cutting conditions. Share the drawing requirements, material, machine runout and workholding. Confirm the process through trial measurements of dimensions, sidewalls and both edges.

How do the fine teeth and flutes maintain chip clearance?

Helical flutes provide a path for chips, supported by the stock allowance, toolpath and external extraction. Check buildup and heat effects in enclosed slots, deeper areas and thin-wall contours before setting cutting stages, finishing allowance and entry method.

How should I choose CVD diamond or DLC?

Select around the fiber/resin system, cutting-edge wear, adhesion and finished-surface requirements. Assess compatibility separately for each option. Keep material, path and workholding consistent when comparing durability, and judge results against part quality and replacement criteria. Confirm the supplied configuration and parameters when ordering.

Discuss your application

Tell us the material, machining location and finished-part requirements.
Review the size, coating and finishing setup.

xiufeng@hsitool.com

Select a size above or describe your application below.

Creates a draft on this device. No information is submitted or uploaded.

    product description

    Product overview

    For profile finishing, sidewall machining and edge trimming in carbon-fiber and glass-fiber composites. Fine cutting teeth work with helical chip-clearance flutes to address dimensional, tool-mark and edge-quality requirements while maintaining a path for chips to leave the cut.

    Selection considerations

    This version focuses on profile finishing, sidewalls and edge-surface requirements. The coarse-tooth version focuses more on cutting and stock removal. Select around allowance, surface requirements, material and workholding; use a representative trial to decide whether separate roughing and finishing passes are needed.

    Application checks

    CFRP and GFRP are the main application materials. Selection also needs the resin system, layup, thickness and quality requirements. Assess copper-clad boards, honeycomb, sandwich structures and composite/metal stacks separately.

    Discuss your application

    For product selection, send CompTex your laminate grade, edge requirements and cutting load. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    Order Number d1 l2 l1 d2 Z Diamond DLC
    4056037001 4 12 50 4 4 8101 4032
    4056037002 6 18 50 6 4 8102 4033
    4056037003 8 22 60 8 6 8103 4034
    4056037004 10 25 75 10 6 8104 4035
    4056037005 12 32 80 12 8 8105 4036
    4056037006 16 40 100 16 8 8106 4037

    Leave Your Message