Leave Your Message

PCD Corner Radius Router Bit for CFRP Composites Machining

PCD Corner Radius Router Bit
for CFRP Composites Machining

PCD corner-radius routing for CFRP profiles and local features.

Review panel edges, skin openings and rib features through the part drawing, laminate layup and support plan.

Discuss your part
Original CompTex PCD corner radius router bit for CFRP machining
CFRP profile routing · Original CompTex product image.
Diameter d1
3–12 mm
Cutting length l2
3–9 mm
Flutes Z
2

Dimensions & sizes.

Read the dimensions against your part drawing. Listed sizes are a starting point for tool selection.

Original CompTex dimensional image with d1, l2, l1 and d2; R is not labeled in the source image
Original dimension reference. R is not labeled; confirm the end geometry on the final tool drawing.
d1
Cutting diameter
R
Corner radius (listed)
l2
Cutting length
l1
Overall length
d2
Shank diameter
Z
Flute count

R values follow the current website. Confirm R and the end geometry against a signed tool drawing before ordering or programming.

12 listed sizes

Swipe the table to compare all dimensions →

PCD corner radius router bit website-listed sizes. Length dimensions in millimeters; Z is flute count.
Order number d1 R l2 l1 d2 Z Select size
5056031001 3.00 0.20 3.00 50.00 4.00 2
5056031002 3.00 0.30 3.00 75.00 6.00 2
5056031003 3.00 0.50 3.00 75.00 6.00 2
5056031004 4.00 0.30 3.00 75.00 6.00 2
5056031005 4.00 0.50 3.00 75.00 6.00 2
5056031006 5.00 0.50 3.00 75.00 6.00 2
5056031007 6.00 0.30 6.00 100.00 6.00 2
5056031008 6.00 0.50 6.00 100.00 6.00 2
5056031009 6.00 1.00 6.00 100.00 6.00 2
5056031010 8.00 0.50 7.00 100.00 8.00 2
5056031011 10.00 1.00 8.00 100.00 10.00 2
5056031012 12.00 1.00 9.00 105.00 12.00 2
Metric · Lengths in mm · Z = flutesDiscuss another size

Twelve website-listed options. d1, R, l2, l1 and d2 are in mm; Z is a flute count. The website and catalog disagree on R: confirm the final radius and end geometry on a signed tool drawing before ordering or programming.

Parts & Applications.

Examples for material and feature review. Each application requires drawing and trial confirmation.

Carbon-fiber laminate panel from the supplied machining video material
CFRP panel geometry · Supplied video reference; not a trial of this router bit.

CFRP panels

Outer profiles, perimeter trimming and local edge features on carbon-fiber laminate panels.

Review panel thickness, fiber directions at the cut and support close to the edge.

Skins & covers

Access openings, edge contours and local flange features in formed composite skins or covers.

Check curvature, back-face support, fixture clearance and tool-axis access.

Ribs & brackets

Relief features, outline finishing and local recesses on structural ribs and brackets.

Match the specified fillet to the confirmed tool geometry; review thin walls and remaining laminate.

CFRP is the primary material direction. For GFRP, aramid or metal-containing stacks, identify every layer, resin and grade for a separate suitability review.

Before you select.

Let the feature, fiber direction and support define the tool review.

Curved-shell edge trimming setup from the supplied machining video
Curved-shell trimming · Supplied video reference. The tool shown is a different model.

Start with the edge and layup

Mark the fiber directions along the profile and define which faces need inspection. Use representative entry, exit and direction changes to assess fraying, pull-out and edge damage in the trial.

Check reach against the fixture

Cutting lengths l2 are 3–9 mm; overall lengths l1 are 50–105 mm. Review wall engagement, overhang, holder clearance and backing support separately. Total length alone does not establish usable cutting depth.

Confirm R before the toolpath

The website lists R 0.2–1 mm, while the catalog shows different values for the same orders. Obtain the signed end-geometry drawing before setting corner offsets, ramp entry or three-dimensional contact positions.

Selection questions.

Which CFRP parts should be reviewed?

Panels, skins, covers, ribs and brackets are useful starting points where the part requires routed profiles or local features. These are selection references. Suitability depends on the material system, drawing, access, support and a representative trial.

How do the three 6 mm options differ?

The website lists orders 5056031007, 5056031008 and 5056031009 with R 0.3, 0.5 and 1 mm respectively. All three list l2 6 mm, l1 100 mm, d2 6 mm and Z 2. R differs from the catalog, so confirm the selected order on the signed tool drawing.

Can this replace the bullnose router bit?

Corner-radius and bullnose names can describe related end shapes. These pages use different order families: 5056031 here and 5056032 for the composite-slotting product. Do not substitute by name or diameter alone; compare the confirmed R, cutting length, overall envelope and material requirement.

What is needed for a cutting review?

Share the material and layup, part drawing, required R, thickness or feature depth, machine, holder, overhang, backing and inspection limits. No model-specific cutting window is established here. Entry method, speeds, feeds and any metal layers need technical review and trial confirmation.

Discuss your part.

Share the material and feature requirements so we can review the tool geometry with you.

xiufeng@hsitool.com

Choose a listed size above, or enter your requirements.

Creates a draft on your device. No files or details are uploaded.

    product description

    Product overview

    CompTex's PCD corner radius router bit is a selection option for CFRP profiles, panel edges, openings and local rib features. Review the corner radius, cutting length, laminate layup and support against the part drawing before choosing a size.

    Selection considerations

    Panels, skins, covers, ribs and brackets are useful starting points where the part requires routed profiles or local features. These are selection references. Suitability depends on the material system, drawing, access, support and a representative trial.

    Application checks

    The website lists orders 5056031007, 5056031008 and 5056031009 with R 0.3, 0.5 and 1 mm respectively. All three list l2 6 mm, l1 100 mm, d2 6 mm and Z 2. R differs from the catalog, so confirm the selected order on the signed tool drawing.

    Discuss your application

    For product selection, send CompTex your CFRP layup, corner radius and machining depth. Include the product name, required size or order number, quantity and a drawing so we can review the configuration for your application.

    Product Parameters

    METRIC
    Order Number d1 R l2 l1 d2 Z
    5056031001 3 0.2 3 50 4 2
    5056031002 3 0.3 3 75 6 2
    5056031003 3 0.5 3 75 6 2
    5056031004 4 0.3 3 75 6 2
    5056031005 4 0.5 3 75 6 2
    5056031006 5 0.5 3 75 6 2
    5056031007 6 0.3 6 100 6 2
    5056031008 6 0.5 6 100 6 2
    5056031009 6 1 6 100 6 2
    5056031010 8 0.5 7 100 8 2
    5056031011 10 1 8 100 10 2
    5056031012 12 1 9 105 12 2
    Other sizes available upon request. Contact CompTex.

    Leave Your Message